|
The French scale or French gauge system is commonly used to measure the size of a catheter. It is most often abbreviated as Fr, but can often be seen abbreviated as Fg, Ga, FR or F. It may also be abbreviated as CH or Ch (for Charrière, its inventor). The French size = 3 times the diameter in millimeters. A round catheter of 1 French has an external diameter of mm,〔(【引用サイトリンク】title= 1 French )〕 and therefore the diameter of a round catheter in millimetres can be determined by dividing the French size by 3: D (mm) = Fr / 3 ''or'' Fr = D (mm) * 3 For example, if the French size is 9, the diameter is 3 mm. From the basic math equation C = d, it follows that the catheter's circumference in mm is only slightly (about 4.7%) greater than the French size. An increasing French size corresponds to a larger external diameter. This is contrary to needle-gauge size, where an increasing gauge corresponds to a smaller diameter needle. The French size is a measure of the external diameter of a catheter (not internal drainage channel). So, for example, if a two-way catheter of 20 Fr is compared to a 20 Fr three-way catheter, they both have the same external diameter but the two-way catheter will have a larger drainage channel than the three-way. Three-way catheters accommodate an extra channel for irrigation within a similar external diameter. The French gauge was devised by Joseph-Frédéric-Benoît Charrière, a 19th-century Parisian maker of surgical instruments, who defined the "diameter times 3" relationship. ==Size correspondence== 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「French catheter scale」の詳細全文を読む スポンサード リンク
|